You are here

Home » Catalog » Wire-Pulling Grips » Parallel-Jawed Grips

Parallel-Jaw Grip, HDPE-Coated Cable to 34.595 mm

Cat. No.: 
171670
Product Features
Pulls HDPE-coated cable, commonly known as 'tree wire', securely
Innovative high-traction surface grips the cable without damaging the outer jacket
Tough carbide grit technology withstands even the harshest job-site conditions
Pulls cable diameters of 0.625'' to 1.362'' (15.875 mm to 34.595 mm)
Spring loaded for one-handed operation and easy placement on the conductor
Common tree wire cable types include general cable, Hendrix® aerial systems, rite lite BLL conductor and Southwire® S2 covered cable
Southwire® is a registered trademark of Southwire Company, LLC
Hendrix® is a registered trademark of Marmon Utility, LLC
Specifications
Type:
Parallel-jaw Grip
Application:
Wide-Range Cable Pulling Grip
Special Features:
High-Traction grip surface
Overall Length:
12-1/2'' (317.5 mm)
Overall Height:
8-1/2'' (215.9 mm)
Overall Width:
2-3/4'' (69.9 mm)
Material:
Forged steel
Cable Diameter:
0.625'' to 1.362'' (15.9 to 34.6 mm)
Cable Type:
HDPE-coated tree wire
Jaw Length:
4-1/2'' (114.3 mm)
Jaw Type:
Round jaw
Maximum Safe Load:
4,000 lb (1,814 kg)
Standard:
OSHA
Weight:
5.10 lb (2.31 kg)
Downloads
High Res JPG
High Res EPS
Warnings

Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.

When used on/near live lines, ground, insulate or isolate grip before pulling.

Do not exceed rated capacity.

Always match proper size and type of grip to application.