Insulated Klein-Kurve® Wire Stripper/Cutter

11054EINS

  • 1000V Rated for safety on the job and VDE Certified; unique three-part insulation with white underlayer provides a warning sign that the insulation may be compromised
  • Cuts, strips, loops and gauges both solid and stranded wire
  • Spring loaded for self-opening; serrated nose for easy bending, shaping and pulling of wire
  • Shears 6-32 and 8-32 screws cleanly. Do not use for cutting steel wire.
  • Made in the USA
  • Multi-colour, sleek design with small thumb guards for ease of handling and easy storage on your tool belt
  • Durable, moulded insulation meets or exceeds ASTM F1505 and IEC 60900 standards for insulated tools
klein-kurve Product Icon
vde-gs-insulated Product Icon
1000volt Product Icon
made-usa-en Product Icon
Videos
Downloads

Klein Tools Electrician's Insulated Solid and Stranded Stripper is 1000V rated and VDE certified for safety on the job. The multi-colour, sleek design with small thumb guards allow easy handling and storage. The three-part insulation with white underlayer provides a warning sign that insulation may be compromised. The durable, moulded insulation meets or exceeds IEC 60900 and ASTM F1505 standards for insulated tools.

Specifications
Application:
8-16 AWG solid and 10-18 AWG stranded copper wire, and shearing 6-32 and 8-32 screws
Special Features:
Compact and lightweight – Spring loaded for self-opening
Material:
Steel
Insulated:
Yes
Strips and Cuts:
8-16 AWG Solid, 10-18 AWG Stranded
Screw Shearing:
6-32 and 8-32
Standard:
IEC 60900 and ASTM F1505
Overall Length:
7.7'' (19.6 cm)
Handle Colour:
Orange/Grey
Handle Finish:
3-Layer Insulation
Weight:
8 oz (227 g)
UPC:
092644740107
Additional Information
Feature Icon klein/wf_solid-816awg.jpg
Feature Icon klein/wf_stranded-1018awg.jpg
Feature Icon klein/wf_screw-shearing.jpg
Warnings
  • Whenever possible, always switch off lines and equipment prior to working on or around them. Klein insulated tools are designed only to reduce the chance of injury where the tool may make contact with a live source.
  • Only use tools that are marked with the official international 1000-volt rating symbol shown below, if there is any chance that the tools will make contact with a live electrical source.
  • Always inspect your tools before use.
  • Always wear approved eye protection.
  • Do NOT touch uninsulated portion of the tool or any conductive object when either might contact a live electrical source.