Grip for High-Strength Cables - 14 mm
1684-5
- Designed for cable sizes from 0.218'' to 0.55'' (5.5 to 13.9 mm) with a maximum safe load of 8000 lbs (3629 kg)
- Double ''V'' grooves give four-point contact, reducing the chance of slipping and providing proper alignment of the wire and cable
- Manufactured from drop-forged, heat-treated steel for excellent durability
- Locking handle keeps jaw open while grip is placed on cable with a hot stick
- Made in the USA
Videos
Images
High-Res JPG
1684-5_photo.jpg
Designed for use on aluminium, copper, weatherproof coated wire, PVC-covered conductors, and messenger and guy strand. The Chicago-style grip was designed for cable sizes from 0.218'' to 0.55'' (5.5 mm to 13.9 mm). Double 'V' grooves give four-point contact, reducing the chance of slipping and providing proper alignment of the wire and cable.
Specifications
Type:
Chicago Grip
Application:
Wire pulling
Cable Type:
Aircraft, EHS, Messenger, Guy Strand
Cable Diameter:
0.218'' to 0.55'' (5.54 to 13.97 mm)
Hot Latch:
N
Swing Latch:
N
Spring:
Y
Locking Handle:
Y
Jaw Type:
Double V
Jaw Length:
5'' (12.7 cm)
Maximum Safe Load:
8000 lb (3629 kg)
Weight:
5.8 lb (2.6 kg)
UPC:
092644471629
Additional Information
Warnings
- Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
- When used on/near live lines, ground, insulate or isolate grip before pulling.
- Do not exceed rated capacity.
- Always match proper size and type of grip to application.
- Grips are to be used for temporary installation, not for permanent anchorage.
